Rust Nightmare v4 – Rust Cronus Zen Script

Initial Setup Instructions

• FIRST: Reset your in-game values and match the ones listed below.

• SECOND: You have two options for plug and play values that work. You do not need to adjust anything besides in-game settings.

• THIRD: There are two different types of deadzones:

  • Ingame Deadzone must remain 1 and 1.

  • Script deadzone acts as your ingame deadzone to stop stickdrift.

  • SCRIPT DEADZONE has a default of 10 but can be changed. See below.

• LASTLY: If you are using plug and play, do not TOUCH the custom sens menu. Leave everything at 0 unless you are having issues with the semis.

  • If you are having issues with the semi guns, read the Custom Sens Section.

Recommended Configuration Notes

• If you're playing the game in a different language, change it to English since the settings menu may differ.

• Use the recommended values.

• Yes, your deadzone needs to be 1 IN GAME.

• The default script deadzone is 10. It can be changed in the main menu. See the Main menu section below.

• The lower the deadzone, the smoother the aiming.

• If you have stick drift, refer to the Main Menu Section for instructions on adjusting the SCRIPT DEADZONE.

Main Menu Instructions

• Hold L2 / LT + OPTIONS to enter the main menu.

  • If the menu doesn’t open, you may have a controller or cable issue.

• While in the Menu:

  • Tap TRIANGLE / Y to switch weapon profiles / Jackhammer and Deadzone.

  • Tap LEFT or RIGHT to navigate the attachments for that weapon.

  • Tap UP or DOWN to toggle ON/OFF the attachment anti recoil for that weapon.

  • Tap Cross / A to access the Weapon Profile Menu (see section below).

  • Tap Square / X to access the custom sens menu for the gun listed on the top line.

    • Do not use this if you are using plug and play.

Weapon Profile Behavior

• Pressing Y changes the top line (guns / Jackhammer / Deadzone).

• Each gun has a middle line listing the 3 attachments: Holo, Ironsight, and 4x.

• Each attachment has its own ON/OFF toggle on the bottom line for the current gun.

• To use AK with 4X:

  • Make sure the top line says AK.

  • Hit LEFT or RIGHT on the Dpad until you see 4X.

  • Hit UP on the Dpad to turn it on.

  • Hit LEFT on the Dpad and turn HOLO and Iron Sight off.

• Common mistake: Using AK with HOLO or Ironsight while 4X is still turned on (causes gun to shoot down).

• Refer to the Weapon Profile Menu section to:

  • Set up 3 profiles for quick toggling (without entering the menu).

  • Use the built-in safety that only allows one attachment at a time.

    • This is the recommended method for changing guns.

Using Weapons Not Assigned to Quick Toggle

• Access the menu.

• Press Y to navigate to the weapon.

• Use LEFT / RIGHT on Dpad to choose the attachment.

• Use UP on Dpad to turn the attachment’s Anti Recoil ON.

• Tap PS / XBOX button to save and exit OLED menu.

• If successful, the gun name will appear at the bottom of the OLED.

Script Deadzone Adjustment Instructions

• The default deadzone for the script is 10.

• If you want to change the script deadzone due to stick drift:

  1. Hold L2 / LT + OPTIONS to enter the main menu.

  2. Tap TRIANGLE / Y until you see deadzone.

  3. Tap UP to turn it ON (this disables the default value of 10).

  4. Tap X to open the edit value menu.

  5. Hold Cross / A and press UP or DOWN to change value by 10.

  6. Hold Cross / A and press LEFT or RIGHT to change value by 1.

  7. When done, press the PS or XBOX button to save.