Avenged Elite V3 – Call of Duty: Modern Warfare 4 Cronus Zen Script

GETTING STARTED

1. Select Script: Load the Zen slot containing AVENGED_MW4_V2_2.gpc.
2. Open Menu: Hold physical L2 + OPTIONS (Xbox: LT + MENU), then release both. This combination remains unchanged when Flipped Buttons is ON.
3. Configure Setup: Match your in-game Button Layout, Flipped Buttons, Left Handed and Inverted Aim settings.
4. Select Weapon Profile: Choose P1, P2 or P3. Fresh defaults have Anti-Recoil ON (Vertical 25 / Horizontal -1), with optional features OFF.
5. Adjust Settings: Test during practice, make small adjustments and save your configuration.
6. Enable Aim Preset: Turn Sticky Aim ON to activate the built-in aim pattern.

MENU CONTROLS

• D-pad Up / Down: Navigate settings and pages.
• D-pad Left / Right: Adjust values or toggle options.
• L1 / R1 (Xbox LB / RB): Skip between menu sections.
• PlayStation X / Xbox A: Save all settings and exit.
• Circle / Xbox B: Exit without saving.
• OPTIONS / Xbox MENU: Exit without saving.

Saving Settings

• SETTINGS SAVED: Your configuration has been saved successfully.
• UNSAVED: Changes are active but have not been permanently saved.
• Exiting without saving keeps changes active until the script restarts.

QUICK COMMANDS

Use these shortcuts outside the menu by pressing SHARE (Xbox VIEW) together with the corresponding D-pad direction.

• SHARE + D-pad Up: Toggle all script features ON/OFF.
• SHARE + D-pad Down: Save current settings.
• SHARE + D-pad Left: Previous profile (Cycle) or P1 (Direct).
• SHARE + D-pad Right: Next profile (Cycle) or P2 (Direct).

Profile Shortcut Modes

• Cycle Mode: Switch between P1, P2 and P3.
• Direct Mode: Left selects P1 and Right selects P2. P3 remains accessible through the Weapon Profile menu.
• The Weapon Profile setting inside the editor always allows selection of all three profiles, regardless of shortcut mode.

Important: Press SHARE/VIEW and the D-pad direction together. Standalone SHARE/VIEW inputs pass directly through to the game.

WEAPON SETTINGS

Weapon settings are saved independently for each profile.

Weapon Profile

• Choose between P1, P2 and P3.
• Switch profiles manually when changing weapons.
• Each profile stores its own Weapon, Aim and Fire configuration.

Anti-Recoil

• Applies recoil correction while aiming and firing.
• Vertical Recoil: Adjusts vertical correction from -100 to 100.
• Horizontal Recoil: Adjusts horizontal correction from -100 to 100.

Manual Priority

• Reduces opposing recoil correction when you move the aiming stick against it.
• Works independently on the vertical and horizontal axes.
• At 15% opposing stick travel, correction on that axis reaches zero.
• Optional and disabled by default.

Hold Breath

• Holds the breath button for up to 3 seconds while aiming.
• Release aim to rearm.
• Saves independently for each weapon profile.

Shot Movement

• OFF: No automatic action.
• DROP SHOT: Activates crouch when firing begins while aiming.
• JUMP SHOT: Activates jump when firing begins while aiming.
• Release fire to rearm.
• Manual jump or crouch input cancels the automatic action.
• Saves independently for each weapon profile.

AIM SETTINGS

Aim settings are saved independently for each profile.

Sticky Aim

• Activates a fixed aiming-stick movement pattern while aiming and firing.
• Overrides Manual Aim Assist while enabled.
• Manual Aim Assist values remain saved.

Manual Aim Assist

• Allows customization of the aiming-stick movement pattern.
• Requires Sticky Aim to be OFF.

Aim Radius

• Controls the size of the aiming-stick movement.
• Adjustable from 0 to 12.

Aim Speed

• Controls the speed of the aiming pattern.
• Adjustable from 1 to 10.

Aim Activation

• ADS + FIRE: Activates while aiming and firing.
• WHILE ADS: Activates whenever aiming.

ADS Precision

• Softens small aiming-stick inputs while aiming for finer adjustments.

Important: These features generate controller-input patterns. They do not detect targets or provide automatic target locking.

FIRE SETTINGS

Fire settings are saved independently for each profile.

Fire Mode

• OFF: Normal trigger control.
• RAPID FIRE: Repeated firing inputs while holding the trigger.
• 2-PULSE BURST: Sends two trigger pulses per held pull.
• 3-PULSE BURST: Sends three trigger pulses per held pull.
• 4-PULSE BURST: Sends four trigger pulses per held pull.

Fire Rate

• Adjustable from 120 to 1200 RPM.
• Applies to Rapid Fire and Burst modes.

Additional Notes

• Burst modes count trigger pulses, not guaranteed shots.
• Actual firing behaviour depends on the weapon and game mechanics.
• Release fire to rearm burst firing.
• Setting Fire Mode to OFF preserves normal trigger control.

MOVEMENT SETTINGS

Movement settings apply globally across all weapon profiles.

Auto Sprint

• Automatically sends sprint inputs while moving strongly forward.

Bunny Hop

• Repeatedly sends jump inputs while holding jump and moving.

Hop Interval

• Adjustable from 100 to 400 ms.
• Lower values generate faster repeated jump inputs.

Mantle Guard

• Preserves the initial 260 ms of a moving jump hold before repeated Bunny Hop inputs begin.
• Allows the game to receive the initial sustained jump input before additional jumps are generated.

Slide Style

• OFF: Disables automatic slide actions.
• SLIDE CANCEL: Sends a jump input after the slide delay.
• SUPINE SLIDE: Sends a second crouch input after the slide is initiated.

How to Activate Slides

• Sprint forward to establish sustained forward movement.
• Briefly tap and release crouch while continuing to sprint.
• Keep moving forward as the slide action is queued.
• The script sends the corresponding jump or crouch input depending on your selected Slide Style.

Slide Input Tolerance

• A queued slide tolerates forward stick input dropping from 80% to 70%.
• Small reductions in forward movement no longer immediately cancel a queued slide.

Slide Delay

• Adjustable from 150 to 600 ms.
• Applies only to Slide Cancel.

Important: Movement behaviour depends on your in-game settings and mechanics.

SETUP SETTINGS

Setup settings apply globally across all weapon profiles.

Button Layout

Select the layout matching your in-game MW4 configuration:

• DEFAULT
• TACTICAL
• BUMPER JUMPER
• BUMPER J TACT

Flipped Buttons

• Enable if your in-game configuration swaps triggers and bumpers.
• The menu-opening combination still uses the physical L2/LT button.

Left Handed

• Enable if your movement and aiming sticks are swapped.

Inverted Aim

• Enable if your vertical aiming direction is inverted.

Hair Triggers

• Sends full aim/fire input once the physical trigger reaches 10%.

Profile Shortcuts

• CYCLE P1-P2-P3: Cycle through all three weapon profiles.
• DIRECT P1 / P2: Instantly select P1 or P2 using SHARE/VIEW shortcuts.
• P3 can always be selected through the Weapon Profile menu.

Save And Exit

• Press PlayStation X / Xbox A from any menu page to save all settings and close the menu.

IMPORTANT INFORMATION

• Per-Profile Settings: Weapon, Aim and Fire settings are saved independently for P1, P2 and P3.
• Global Settings: Movement and Setup settings apply to all profiles.
• Saving: Always save your configuration after making adjustments. Unsaved changes remain active only until the script restarts.
• Previous Versions: Compatible older saves carry over where their slot data remains available. Older shared Hold Breath and Shot Movement settings are copied to each profile when upgrading.
• Manual Priority: Correction is reduced independently on each axis, reaching zero at 15% opposing stick travel.
• Slide Activation: Requires sustained forward movement and a short crouch tap. Queued slides tolerate forward stick input dropping from 80% to 70%.
• Profile Switching: Cycle mode accesses all three profiles; Direct mode provides shortcuts for P1 and P2.
• Screen Behaviour: The Zen screen remains active while this script is running. There is no idle timeout.