16 NOV — GÉNÉRATEUR IA ROBLOX AJOUTÉ

Auto Green V2 : script Cronus Zen pour NBA 2K25

Premium
NBA 2K25
Auto Green V2
NBA 2K25
Guides
Prêt à l’emploi
Illustration

Auto Green V2

Flocka

Détails du script

Créateur
Flocka
Accès
Premium
Format du téléchargement
.GPC
Plateformes compatibles
Multiplateforme
Version
V2
Fiche mise à jour

Auto Green V2 est un script Zen pour NBA 2K25 créé par Flocka. Consultez les informations de téléchargement et de configuration ci-dessous.

Ce script Cronus Zen pour NBA 2k25 est développé par Flocka.

Fonctionnalités

Guides

Ce script comprend un guide d’utilisation

Prêt à l’emploi

Ce script ne nécessite aucun réglage pour commencer

Guides

Player Profiles

You have 3 different player profiles:

  • Profile 1 (Blue Color LED)

  • Profile 2 (Pink Color LED)

  • Profile 3 (Aqua Color LED)

Each of the 3 profiles also has a temporary value (Temp Val) which is adjustable.
This Temp Val will be added to or subtracted from the pre-stored value to allow you to make fine adjustments to your shots.

Note: Temp Val is profile-dependent. If you change the player on a profile, remember to reset the Temp Val.
You can reset these temporary values from the ModPlayer by holding CROSS/A for 500ms. (You can only reset the temp values of the active profile.)

 

Adjusting Your Shot Timing

You can write down your adjusted values on a piece of paper.
You will then be able to modify the values in the corresponding arrays.
This way, while in-game, when you change Team or Player, your shot timing will already be perfectly adjusted for you.

Note: Player names can be up to 11 characters long.

Features in Each Profile

  • Green Shot with its own toggle and adjustable values

  • Jump Shot with its own toggle and adjustable values

  • Free Throw with its own toggle and adjustable values

  • Pro Shot with its own toggle and adjustable values

Global Features for All Profiles

  • Shot Recorder: Records the time for a shot to use it later with a button combo.

  • Sprint: Sets the trigger to fully held when the Left Stick is pushed over 80 percent.

  • Swap Trigger/Bumper: Global toggle to swap triggers and bumpers.

  • VM Speed: Helps with lag and delay to the console.

Shot Mods with Adjustable Values

All of these perform the same function—setting the timing for a shot:

  • Green Shot:

    • Set the time for the green shot mod.

    • Trigger: X/Square to shoot.

  • Free Throw:

    • Set the time for free throw mod.

    • Trigger: X/Square to shoot.

  • Jump Shot:

    • Set the time for jump shot mod.

    • Trigger: X/Square to shoot.

  • Dribbles:

    • Perform a dribble on either the Right Stick (RS) or Left Stick (LS) by pressing the stick inward.

Note: A good default release time is between 200ms and 500ms.

Warning: It is recommended to use only one shot mod active at a time. Use quick toggles to turn them on/off once enabled in the menu.

Global Features

  • Button Layout:

    • Match your controls from the game to the script so everything functions properly.

  • Stick Layout:

    • Match your controls from the game to the script layout.

  • Green Shot & Jump Shot:

    • Set your own timing for specific spots you like to throw from.

  • Free Throw:

    • Timing adjustments ensure consistent performance.

  • Swap Trigger/Bumper:

    • Swap L1/LB with L2/LT and R1/RB with R2/RT.

Pro Shot & Rhythm Shot

  • Pro Shot:

    • Allows Right Stick press down, then up, bottom-right to top-left, or bottom-left to top-right based on your hold and release times.

    Example: The hold time from Right Stick DOWN to Right Stick UP. Release time can be default or 200ms.

  • Rhythm Shot:

    • Similar to Pro Shot but activated by pressing Left Bumper (LB/L1).

    • Use the Square Button and release your jump shot at the SET POINT.

    • The script automatically pushes the Right Stick for you, but you must time your shot.

Notes:

  • Rhythm shooting generally takes longer compared to regular shooting.

  • Different jumpshots have different Rhythm Timing.

  • Shoot at the SET POINT for best results.

  • Your shot release time does not matter.

  • The Rhythm Timing window for good shots is about 120ms or more.

  • If your shot is too late or slow, decrease your Rhythm Timing.

  • If your shot is too early or fast, increase your Rhythm Timing.

Rec Shot (Do Not Use with Other Shot Mods on One Profile!)

  1. Turn mod ON and make your shot.

  2. If you like the shot, use the D-Pads to set the shot.

This records how long the shot button is held, and saves it.
You can assign it to a D-Pad for future use:

  • DPAD UP = Rec Shot 1

  • DPAD DOWN = Rec Shot 2

  • DPAD LEFT = Rec Shot 3

  • DPAD RIGHT = Rec Shot 4

Notes:

  • You will feel one vibration when the shot is recorded.

  • You will feel two vibrations when it is saved.

How to use the saved shot:

  • Hold Left Bumper (LB/L1) & press Y = Shot saved to UP D-Pad

  • Hold Left Bumper (LB/L1) & press A = Shot saved to DOWN D-Pad

  • Hold Left Bumper (LB/L1) & press B = Shot saved to RIGHT D-Pad

  • Hold Left Bumper (LB/L1) & press X = Shot saved to LEFT D-Pad

Additional Features

  • Sprint:

    • Player auto-moves when Left Stick pushed over 80%.

  • Rumbles:

    • Blocks all controller vibrations and adaptive triggers. (In-game rumble must be ON.)

  • VM Control:
    Adjusts Cronus Zen processor speed to reduce lag:

    • Default (10ms) = 0

    • Xbox One (8ms) = 1

    • PS4 (6ms) = 2

    • PS5 (4ms) = 3

    • Xbox Series (2ms) = 4

    • PC (1ms) = 5

Toggle Information

  • KillSwitch:

    • Disable script quickly when mods start running unexpectedly.

  • Resync Button:

    • Hold L3/LS and tap Triangle/Y to resync profiles.

  • Speed Toggle:

    • Quickly toggle mods ON/OFF without using the full menu.

  • Speed Player Swap:

    • Quickly switch teams and players without entering ModPlayer.

Instructions - Please Read Carefully

How to Use the Mod Menu

  1. Open Mod Menu:

    • Press L2/LT + OPTIONS/MENU.

  2. Choose Profile:

    • Tap Triangle/Y to select Player 1, Player 2, or Player 3.

  3. Navigate Mods:

    • Use Left/Right D-Pad to move between mods.

    • Tap Up/Down D-Pad to turn mods ON or OFF.

  4. Exit Mod Menu:

    • Double-tap Circle/B to save settings and exit.

How to Use ModEdit

  1. Edit Values:

    • After selecting a mod, tap CROSS/A to enter ModEdit.

    • Use Left/Right D-Pad to switch values.

    • Use Up/Down D-Pad to adjust values.

  2. Exit ModEdit:

    • Press Circle/B to return to Mod Menu.

How to Use ModPlayer

  1. Choose Profile:

    • Tap Triangle/Y.

  2. Switch Teams/Players:

    • Use Up/Down D-Pad for teams.

    • Use Left/Right D-Pad for players.

  3. Reset Temp Val:

    • Hold CROSS/A for 500ms to restore default shot meter values.

  4. Exit ModPlayer:

    • Tap Circle/B to return to Mod Menu.

    • Double-tap Circle/B to exit all menus.

Installation et configuration

Suivez ces étapes pour installer le fichier GPC téléchargé sur votre Cronus Zen.

Guide d’installation complet
  1. Téléchargez le script

    Utilisez le bouton de téléchargement de cette page et enregistrez le fichier .gpc sur votre ordinateur.

  2. Connectez votre Cronus Zen

    Ouvrez Zen Studio Live dans Chrome ou Edge.

    • Connectez votre Cronus Zen par le port PROG et sélectionnez « Connect Device ».
  3. Ouvrez le script dans l'onglet Éditeur

    Faites glisser le fichier .gpc téléchargé dans l'onglet « Éditeur ».

  4. Ajouter le script à un emplacement de périphérique

    Allez dans l'onglet Appareil, sélectionnez MES SCRIPTS en haut à droite, puis faites glisser le fichier .gpc choisi dans un emplacement vide.

  5. Programmer le Cronus Zen

    Cliquez sur le bouton Programme orange clignotant en haut pour enregistrer le script sur votre Zen.

  6. Connectez, sélectionnez votre emplacement et testez

    Une fois la programmation terminée, connectez le Zen à votre console ou PC en suivant la procédure adaptée à votre plateforme. Sélectionnez l’emplacement du script installé, puis suivez la configuration des touches et les valeurs de départ du créateur. Testez avant de modifier les réglages et ajustez une seule valeur à la fois.

Besoin d’aide pour la configuration ?

Si le Zen n’est pas détecté, vérifiez la connexion PROG et utilisez un câble USB permettant le transfert de données. Si un fichier GPC ne se compile pas, vérifiez que le téléchargement est complet et que le fichier est compatible avec votre version de Zen Studio.

Auto Green V2 : questions fréquentes

Comment installer Auto Green V2 ?

Ce téléchargement est un script GPC. Suivez les étapes numérotées ci-dessus pour l’ouvrir dans Zen Studio, l’affecter à un emplacement et programmer votre Zen.

Quel accès faut-il pour Auto Green V2 ?

Ce script figure dans la bibliothèque premium. Connectez-vous avec une offre qui inclut ce niveau ; le bouton de téléchargement indique l’accès disponible pour votre compte.

Où trouver les réglages de Auto Green V2 ?

Le guide du créateur figure sur cette page. Connectez-vous avec l’accès requis pour les consulter et adaptez le script à vos réglages en jeu avant toute modification.

Assistance en ligne

Image agrandie

Cliquez n’importe où ou appuyez sur Échap pour fermer

Aperçu du script