ACCÉDEZ À TOUTE LA BIBLIOTHÈQUE DE SCRIPTS ZEN
Accès 2 200+ scripts dès aujourd’hui !
Avenged Elite V3 : script Cronus Zen pour Call of Duty: Modern Warfare 4
Détails du script
- Créateur
Avenged- Accès
- Ultimate
- Format du téléchargement
- .GPC
- Plateformes compatibles
- Multiplateforme
- Version
- V3
- Fiche mise à jour
Avenged Elite V3 est un script Zen pour Call of Duty: Modern Warfare 4 créé par Avenged. Consultez les informations de téléchargement et de configuration ci-dessous.
WHAT'S NEW IN V3
- Profile-Specific Settings: Hold Breath and Shot Movement now save independently for P1, P2 and P3.
- Manual Priority: Reduces recoil correction independently on each axis when you move the aiming stick against it. At 15% opposing stick travel, correction on that axis reaches zero. OFF by default.
- Profile Shortcuts: Choose between cycling through all three profiles or switching directly between P1 and P2.
- Slide Fix: Queued slides now tolerate forward stick input decreasing from 80% to 70% without cancelling.
- Save Compatibility: Recognized older saves carry over when their slot data remains available. Previous Hold Breath and Shot Movement choices are copied to all three profiles during upgrade.
Also Included from V2
Rapid/burst fire options, ADS Precision, Mantle Guard, two slide styles, faster animated startup, section shortcuts, and menu-exit/reload fixes.
Fonctionnalités
Menu des mods
Guides
Guides
GETTING STARTED
- Select Script: Load the Zen slot containing AVENGED_MW4_V2_2.gpc.
- Open Menu: Hold physical L2 + OPTIONS (Xbox: LT + MENU), then release both. This combination remains unchanged when Flipped Buttons is ON.
- Configure Setup: Match your in-game Button Layout, Flipped Buttons, Left Handed and Inverted Aim settings.
- Select Weapon Profile: Choose P1, P2 or P3. Fresh defaults have Anti-Recoil ON (Vertical 25 / Horizontal -1), with optional features OFF.
- Adjust Settings: Test during practice, make small adjustments and save your configuration.
- Enable Aim Preset: Turn Sticky Aim ON to activate the built-in aim pattern.
MENU CONTROLS
- D-pad Up / Down: Navigate settings and pages.
- D-pad Left / Right: Adjust values or toggle options.
- L1 / R1 (Xbox LB / RB): Skip between menu sections.
- PlayStation X / Xbox A: Save all settings and exit.
- Circle / Xbox B: Exit without saving.
- OPTIONS / Xbox MENU: Exit without saving.
Saving Settings
- SETTINGS SAVED: Your configuration has been saved successfully.
- UNSAVED: Changes are active but have not been permanently saved.
- Exiting without saving keeps changes active until the script restarts.
QUICK COMMANDS
Use these shortcuts outside the menu by pressing SHARE (Xbox VIEW) together with the corresponding D-pad direction.
- SHARE + D-pad Up: Toggle all script features ON/OFF.
- SHARE + D-pad Down: Save current settings.
- SHARE + D-pad Left: Previous profile (Cycle) or P1 (Direct).
- SHARE + D-pad Right: Next profile (Cycle) or P2 (Direct).
Profile Shortcut Modes
- Cycle Mode: Switch between P1, P2 and P3.
- Direct Mode: Left selects P1 and Right selects P2. P3 remains accessible through the Weapon Profile menu.
- The Weapon Profile setting inside the editor always allows selection of all three profiles, regardless of shortcut mode.
Important: Press SHARE/VIEW and the D-pad direction together. Standalone SHARE/VIEW inputs pass directly through to the game.
WEAPON SETTINGS
Weapon settings are saved independently for each profile.
Weapon Profile
- Choose between P1, P2 and P3.
- Switch profiles manually when changing weapons.
- Each profile stores its own Weapon, Aim and Fire configuration.
Anti-Recoil
- Applies recoil correction while aiming and firing.
- Vertical Recoil: Adjusts vertical correction from -100 to 100.
- Horizontal Recoil: Adjusts horizontal correction from -100 to 100.
Manual Priority
- Reduces opposing recoil correction when you move the aiming stick against it.
- Works independently on the vertical and horizontal axes.
- At 15% opposing stick travel, correction on that axis reaches zero.
- Optional and disabled by default.
Hold Breath
- Holds the breath button for up to 3 seconds while aiming.
- Release aim to rearm.
- Saves independently for each weapon profile.
Shot Movement
- OFF: No automatic action.
- DROP SHOT: Activates crouch when firing begins while aiming.
- JUMP SHOT: Activates jump when firing begins while aiming.
- Release fire to rearm.
- Manual jump or crouch input cancels the automatic action.
- Saves independently for each weapon profile.
AIM SETTINGS
Aim settings are saved independently for each profile.
Sticky Aim
- Activates a fixed aiming-stick movement pattern while aiming and firing.
- Overrides Manual Aim Assist while enabled.
- Manual Aim Assist values remain saved.
Manual Aim Assist
- Allows customization of the aiming-stick movement pattern.
- Requires Sticky Aim to be OFF.
Aim Radius
- Controls the size of the aiming-stick movement.
- Adjustable from 0 to 12.
Aim Speed
- Controls the speed of the aiming pattern.
- Adjustable from 1 to 10.
Aim Activation
- ADS + FIRE: Activates while aiming and firing.
- WHILE ADS: Activates whenever aiming.
ADS Precision
- Softens small aiming-stick inputs while aiming for finer adjustments.
Important: These features generate controller-input patterns. They do not detect targets or provide automatic target locking.
FIRE SETTINGS
Fire settings are saved independently for each profile.
Fire Mode
- OFF: Normal trigger control.
- RAPID FIRE: Repeated firing inputs while holding the trigger.
- 2-PULSE BURST: Sends two trigger pulses per held pull.
- 3-PULSE BURST: Sends three trigger pulses per held pull.
- 4-PULSE BURST: Sends four trigger pulses per held pull.
Fire Rate
- Adjustable from 120 to 1200 RPM.
- Applies to Rapid Fire and Burst modes.
Additional Notes
- Burst modes count trigger pulses, not guaranteed shots.
- Actual firing behaviour depends on the weapon and game mechanics.
- Release fire to rearm burst firing.
- Setting Fire Mode to OFF preserves normal trigger control.
MOVEMENT SETTINGS
Movement settings apply globally across all weapon profiles.
Auto Sprint
- Automatically sends sprint inputs while moving strongly forward.
Bunny Hop
- Repeatedly sends jump inputs while holding jump and moving.
Hop Interval
- Adjustable from 100 to 400 ms.
- Lower values generate faster repeated jump inputs.
Mantle Guard
- Preserves the initial 260 ms of a moving jump hold before repeated Bunny Hop inputs begin.
- Allows the game to receive the initial sustained jump input before additional jumps are generated.
Slide Style
- OFF: Disables automatic slide actions.
- SLIDE CANCEL: Sends a jump input after the slide delay.
- SUPINE SLIDE: Sends a second crouch input after the slide is initiated.
How to Activate Slides
- Sprint forward to establish sustained forward movement.
- Briefly tap and release crouch while continuing to sprint.
- Keep moving forward as the slide action is queued.
- The script sends the corresponding jump or crouch input depending on your selected Slide Style.
Slide Input Tolerance
- A queued slide tolerates forward stick input dropping from 80% to 70%.
- Small reductions in forward movement no longer immediately cancel a queued slide.
Slide Delay
- Adjustable from 150 to 600 ms.
- Applies only to Slide Cancel.
Important: Movement behaviour depends on your in-game settings and mechanics.
SETUP SETTINGS
Setup settings apply globally across all weapon profiles.
Button Layout
Select the layout matching your in-game MW4 configuration:
- DEFAULT
- TACTICAL
- BUMPER JUMPER
- BUMPER J TACT
Flipped Buttons
- Enable if your in-game configuration swaps triggers and bumpers.
- The menu-opening combination still uses the physical L2/LT button.
Left Handed
- Enable if your movement and aiming sticks are swapped.
Inverted Aim
- Enable if your vertical aiming direction is inverted.
Hair Triggers
- Sends full aim/fire input once the physical trigger reaches 10%.
Profile Shortcuts
- CYCLE P1-P2-P3: Cycle through all three weapon profiles.
- DIRECT P1 / P2: Instantly select P1 or P2 using SHARE/VIEW shortcuts.
- P3 can always be selected through the Weapon Profile menu.
Save And Exit
- Press PlayStation X / Xbox A from any menu page to save all settings and close the menu.
IMPORTANT INFORMATION
- Per-Profile Settings: Weapon, Aim and Fire settings are saved independently for P1, P2 and P3.
- Global Settings: Movement and Setup settings apply to all profiles.
- Saving: Always save your configuration after making adjustments. Unsaved changes remain active only until the script restarts.
- Previous Versions: Compatible older saves carry over where their slot data remains available. Older shared Hold Breath and Shot Movement settings are copied to each profile when upgrading.
- Manual Priority: Correction is reduced independently on each axis, reaching zero at 15% opposing stick travel.
- Slide Activation: Requires sustained forward movement and a short crouch tap. Queued slides tolerate forward stick input dropping from 80% to 70%.
- Profile Switching: Cycle mode accesses all three profiles; Direct mode provides shortcuts for P1 and P2.
- Screen Behaviour: The Zen screen remains active while this script is running. There is no idle timeout.
Installation et configuration
Suivez ces étapes pour installer le fichier GPC téléchargé sur votre Cronus Zen.
-
Téléchargez le script
Utilisez le bouton de téléchargement de cette page et enregistrez le fichier .gpc sur votre ordinateur.
-
Connectez votre Cronus Zen
Ouvrez Zen Studio Live dans Chrome ou Edge.
- Connectez votre Cronus Zen par le port PROG et sélectionnez « Connect Device ».
-
Ouvrez le script dans l'onglet Éditeur
Faites glisser le fichier .gpc téléchargé dans l'onglet « Éditeur ».
-
Ajouter le script à un emplacement de périphérique
Allez dans l'onglet Appareil, sélectionnez MES SCRIPTS en haut à droite, puis faites glisser le fichier .gpc choisi dans un emplacement vide.
-
Programmer le Cronus Zen
Cliquez sur le bouton Programme orange clignotant en haut pour enregistrer le script sur votre Zen.
-
Connectez, sélectionnez votre emplacement et testez
Une fois la programmation terminée, connectez le Zen à votre console ou PC en suivant la procédure adaptée à votre plateforme. Sélectionnez l’emplacement du script installé, puis suivez la configuration des touches et les valeurs de départ du créateur. Testez avant de modifier les réglages et ajustez une seule valeur à la fois.
Besoin d’aide pour la configuration ?
Si le Zen n’est pas détecté, vérifiez la connexion PROG et utilisez un câble USB permettant le transfert de données. Si un fichier GPC ne se compile pas, vérifiez que le téléchargement est complet et que le fichier est compatible avec votre version de Zen Studio.
Avenged Elite V3 : questions fréquentes
Comment installer Avenged Elite V3 ?
Ce téléchargement est un script GPC. Suivez les étapes numérotées ci-dessus pour l’ouvrir dans Zen Studio, l’affecter à un emplacement et programmer votre Zen.
Quel accès faut-il pour Avenged Elite V3 ?
Ce script figure dans la bibliothèque ultimate. Connectez-vous avec une offre qui inclut ce niveau ; le bouton de téléchargement indique l’accès disponible pour votre compte.
Où trouver les réglages de Avenged Elite V3 ?
Le guide du créateur figure sur cette page. Connectez-vous avec l’accès requis pour les consulter et adaptez le script à vos réglages en jeu avant toute modification.












