Step 1: Initial Setup and Calibration

• Set your game sensitivity to 2/2

  • For Call of Duty: sensitivity 2 and multiplier 1.0 with standard curve and aim assist

• When launching the script:

  • Do not touch the joystick for 1 second (controller drift auto-calibration)

Step 2: Disable Mods Before Testing

• Ensure the following settings:

  • USE_AIM_ASSIST = FALSE

  • AR_TYPE = DISABLED

  • USE_STEADY_AIM = FALSE

How to Test:

• Set BOOST to 50

• Game sensitivity: 2/2 (or 10% in Fortnite)

• Move the right stick normally (hip & ADS sensitivity test)

• If movement feels:

  • Usual or slightly faster ➝ Test BALLISTIC_COEF range [10–100], start with 15 or 20

  • Too slow ➝ Increase game sensitivity and repeat the test

• Note:

  • Higher sensitivity = less tracking and stickiness

• Once sensitivity and coefficient feel good:

  • Adjust BOOST for fine-tuning starting at 30

  • Higher boost = more acceleration

Step 2 (continued): Anti-Recoil Setup

• Ensure the following:

  • AR_TYPE = USE_RUMBLE_EVIL_AR or USE_DYNAMIC_EVIL_AR

• Setup:

  • Enter a custom match or Plunder match

  • Adjust AR_STRENGTH range [-25 to 50]

  • Dynamic AR:

    • Weapon pulls down ➝ Decrease strength

    • Want more AR help ➝ Increase strength

  • Rumble AR:

    • Enable vibration in-game

    • Weapon pulls down ➝ Increase strength

    • Weapon goes up ➝ Decrease strength

Step 3: Aim Assist Configuration

• Ensure:

  • USE_AIM_ASSIST = TRUE

• Test AIM_MODULATION modes:

  • DISABLED — Balanced for all ranges

  • STEADY — Best for mid and long range

  • DYNAMIC — Best for close range

• For STEADY and DYNAMIC, test 3 scanning types:

  • FULL — Balanced headshot/tracking

  • VERTICAL — Headshot focused

  • HORIZONTAL — Tracking focused

Tuning Values:

• First tweak AIM_SLOPE range [4–20]

• Then adjust AIM_ASSIST range [12–32] (must be even)

Aim Assist Testing Method:

1. Enable Aim Assist = TRUE

2. Use AIM_MODULATION = DISABLED and SLOPE = 10

3. Test Aim Assist values: 16, 20, 24, 28, 32

   • If you get screen stutter or lose precision, reduce value

   • Fine-tune by ±2 from your best number

4. Keep best AIM_ASSIST value fixed and test SLOPE values:

   • 4, 8, 12, 16, 20

   • Again, fine-tune by ±2

   • This tuning is done with MODULATION = DISABLED

Advanced Modulation Testing:

• After tuning Aim Assist and Slope:

  • For STEADY or DYNAMIC, use best slope and subtract 2 from Aim Assist

    • Example: If best was 20, test 18 with modulation

  • STEADY: Good for long and close fights

  • DYNAMIC: Overpowered for close/mid range

Step 4: Steady Aim Configuration

• Ensure:

  • USE_STEADY_AIM = TRUE

• Adjust RESOLUTION: Test values 4, 6, 8