UNLOCK THE FULL ZEN SCRIPT LIBRARY
Access 2,000+ Scripts Today!
TripleZero – NBA 2K25 Cronus Zen Script

Features
Guides
Plug and Play
Guides
1. Go to Gatorade Courts
-
Load into the Gatorade Court (connected to servers/online).
-
This is where you will properly fine-tune your script settings.
2. Find Your Jumpshot Value
-
Press L1 (LB) to start a jumpshot.
-
After shooting, check if the timing says slightly early, late, very late, etc.
-
Adjust the jumpshot value using R2 (RT) and the D-Pad.
-
Higher value = slower jumpshot timing.
-
Lower value = faster jumpshot timing.
-
3. Find Your Tempo Value
-
Tempo controls how fast the Right Stick Up movement is triggered.
-
If your shot says fast temp, slight fast, or slight slow, adjust accordingly:
-
Higher tempo value = slower tempo.
-
Lower tempo value = faster tempo.
-
-
Adjust the tempo value by holding L2 and pressing the D-Pad.
4. Set Your Latency
-
On Xbox, you can easily find your latency by checking your network connection.
-
Set the latency in the script to match your actual latency.
-
Use RB (R1) to adjust the latency value.
5. Test and Fine-Tune
-
Press L1 (LB) again to trigger your shot.
-
Pay attention to the timing feedback.
-
Adjust your jumpshot, tempo, and latency values until it feels consistent and accurate.
Installation & setup
Follow these steps to install the GPC download on your Cronus Zen.
-
Download the script
Use the download button on this page and save the .gpc file to your computer.
-
Connect your Cronus Zen
Open Zen Studio Live in Chrome or Edge.
- Connect your Cronus Zen through the PROG port and select 'Connect Device'.
-
Open the script in the Editor tab
Drag the downloaded .gpc file into the 'Editor' tab.
-
Add the script to a device slot
Go to the Device tab, select MY SCRIPTS at the top right, then drag the chosen .gpc file into an empty slot.
-
Program the Cronus Zen
Click the flashing orange Program button at the top to save the script to your Zen.
-
Connect, select your slot and test
After programming finishes, connect the Zen to your console or PC using your platform’s connection setup. Select the installed script’s slot, then follow the creator’s button layout and starting values. Test before changing settings, and adjust one value at a time.
Need help with setup?
If the Zen is not detected, check the PROG connection and use a USB cable that supports data. If a GPC file fails to compile, check that the download is complete and that it supports your version of Zen Studio.
TripleZero: common questions
How do I install TripleZero?
This download is a GPC script. Follow the numbered instructions above to open it in Zen Studio, assign a device slot and program your Zen.
What access do I need for TripleZero?
This script is listed in the ultimate library. Sign in with a plan that includes this tier; your download button shows the access available to your account.
Where can I find settings for TripleZero?
The creator’s guide is included on this page. Sign in with the required access to view them, and match the script to your in-game settings before making adjustments.



















