16 NOV — GÉNÉRATEUR IA ROBLOX AJOUTÉ

Goatmode 2k25 : script Cronus Zen pour NBA 2K25

Ultimate
NBA 2K25
Goatmode 2k25
NBA 2K25
Guides
Prêt à l’emploi
Illustration

Goatmode 2k25

Drewk312

Détails du script

Créateur
Drewk312
Accès
Ultimate
Format du téléchargement
.GPC
Plateformes compatibles
Multiplateforme
Fiche mise à jour

Goatmode 2k25 est un script Zen pour NBA 2K25 créé par Drewk312. Consultez les informations de téléchargement et de configuration ci-dessous.

Ce script Cronus Zen pour NBA 2k25 est développé par Drewk312.

Fonctionnalités

Guides

Ce script comprend un guide d’utilisation

Prêt à l’emploi

Ce script ne nécessite aucun réglage pour commencer

Guides

PLAYER PROFILES

You have 3 different player profiles:

  • Profile 1 (Blue Color LED)

  • Profile 2 (Pink Color LED)

  • Profile 3 (Aqua Color LED)

Each of the 3 profiles also has a temporary value (Temp Val) which is adjustable.
This Temp Val will be added to or subtracted from the pre-stored value to allow you to make fine adjustments to your shots.

Note: Temp Val is profile-dependent. If you change the player on a profile, remember to reset the Temp Val.
You can reset these temporary values from the ModPlayer by holding CROSS/A for 500ms (NOTE: You can only reset the temp values of the active profile).

ADJUSTING YOUR SHOT TIMING

You can write down your adjusted values on a piece of paper.
You will then be able to modify the values in the corresponding arrays.
This way, while In Game, when you change Team or Player, your shot timing will already be perfectly adjusted for you.

Note: Player names can be up to 11 characters long!

FEATURES IN EACH PROFILE

  • Green Shot with its own toggle and adjustable values.

  • Jump Shot with its own toggle and adjustable values.

  • Free Throw with its own toggle and adjustable values.

  • Pro Shot with its own toggle and adjustable values.

GLOBAL FEATURES FOR ALL PROFILES

  • Shot Recorder: Records the time for a shot so you can use the shot with a press of 2 buttons later.

  • Sprint: Sets the trigger to fully held when the Left Stick is pushed over 80 percent.

  • Swap Trigger/Bumper: Global toggle to swap triggers and bumpers.

  • VM Speed: Helps with lag and delay to the console.

SHOT MODS WITH ADJUSTABLE VALUES

All of these perform the same function—setting the timing for a shot:

  • Green Shot:

    • Allows you to set the time for green shot mod. To hit greens, you must have good timing for the shot.

    • Trigger: X/Square to shoot.

  • Free Throw:

    • Allows you to set the time for free throw mod. Adjust the timing for perfect free throws.

    • Trigger: X/Square to shoot.

  • Jump Shot:

    • Allows you to set the time for jump shot mod (same function as the others).

    • Trigger: X/Square to shoot.

  • Dribbles:

    • Allows you to perform a dribble on either the Right Stick (RS) or Left Stick (LS). Just press the stick inward.

Note: A good default release time is between 200ms and 500ms.
Warning: Recommend using only one Shot mod active at a time. You can use quick toggles to turn them off or on once enabled in the menu.

GLOBAL FEATURES

  • Button Layout:
    Allows you to match your controls from the game to the script so everything works with your layout.

  • Stick Layout:
    Allows you to match your controls from the game to the script so everything works with your layout.

  • Green Shot & Jump Shot:
    Set your own timing for a spot you like to throw from. This timing allows you to have button held for the desired time.

  • Free Throw:
    Timing is everything for any shot, but you are still covered with your shot being timed.

  • Swap Trigger/Bumper:
    Swap L1/LB with L2/LT and swap R1/RB with R2/RT.

PRO SHOT & RHYTHM SHOT

  • Pro Shot:

    • Pro Shot allows the right stick to be pressed down, then up, bottom-right to top-left, or bottom-left to top-right motion using the time you set for hold and release time.

    • Example: The hold time from Right Stick DOWN to Right Stick UP. Release time can be default or 200ms.

  • Rhythm Shot:

    • This is similar to Pro Shot but makes the shot by pressing Left Bumper (LB/L1).

    • Use the Square Button and release your jump shot at the SET POINT.

    • The script will automatically push your right stick for you. You are required to time your shot.

Note:
Rhythm shooting generally takes longer to shoot compared to regular shooting.
You will notice different timing for every jump shot. You will need to take some practice shots to get the right number down.
Shoot at the SET POINT for best timing.
Your shot release time does not matter. (This is the difference in Rhythm Shooting vs. Normal Shooting).
Rhythm Timing will be different for every shot.
The Rhythm Window with GOOD timed shots is about 120ms and up.
If your shot is too late or too slow, decrease your Rhythm Timing.
If your shot is too early or too fast, increase your Rhythm Timing.

REC SHOT (DO NOT USE WITH OTHER SHOT MODS ON ONE PROFILE!)

  1. Turn mod on and make the shot.

  2. If you like the shot, use the D-Pads to set the shot.
    This records the time you have the shot button held in, and once you release the button, recording stops.
    You then assign it to a D-Pad for later use:

    • DPAD UP = Rec Shot 1

    • DPAD DOWN = Rec Shot 2

    • DPAD LEFT = Rec Shot 3

    • DPAD RIGHT = Rec Shot 4

Note:
You will know if it recorded the shot because it will vibrate once.
When you save it, it will vibrate twice to let you know.

To use the shot:

  • Hold Left Bumper (LB/L1) & press Y for shot saved to the Up D-Pad.

  • Hold Left Bumper (LB/L1) & press A for shot saved to the Down D-Pad.

  • Hold Left Bumper (LB/L1) & press B for shot saved to the Right D-Pad.

  • Hold Left Bumper (LB/L1) & press X for shot saved to the Left D-Pad.

ADDITIONAL FEATURES

  • Sprint:
    Makes the player move when the Left Stick is pushed over 80%.

  • Rumbles:
    Blocks all controller vibrations and adaptive trigger vibrations. (In-game rumble must be ON and adaptive/haptic triggers if available.)

  • VM Control:
    Adjusts the virtual machine (Cronus Zen) speed to reduce input lag and improve timing.

    • Default (10ms) = 0

    • Xbox One (8ms) = 1

    • PS4 (6ms) = 2

    • PS5 (4ms) = 3

    • Xbox Series (2ms) = 4

    • PC (1ms) = 5

TOGGLE INFORMATION

  • KillSwitch:
    In the menu, some mods may start to run like sprint or a shot mod. Use KillSwitch to disable the script.

  • Resync Button:
    Hold L3/LS and tap Triangle/Y to resync profiles.

  • Speed Toggle:
    Quickly toggle a mod on/off without going into the mod menu.

  • Speed Player Swap:
    Switch teams and players on the fly without having to go into ModPlayer.

INSTRUCTIONS - PLEASE READ CAREFULLY

How to Use the Mod Menu

  1. Open Mod Menu:

    • Press L2/LT + OPTIONS/MENU to open or exit the mod menu.

  2. Choose Profile:

    • Tap Triangle/Y to choose Player 1, Player 2, or Player 3.

  3. Navigate Mods:

    • Use Left/Right D-Pad to select mods.

    • Tap Up/Down to turn mods ON or OFF.

  4. Exit Mod Menu:

    • To save all settings, double tap Circle/B.

How to Use ModEdit

  1. Edit Values:

    • After selecting a mod, tap CROSS/A to enter ModEdit.

    • Navigate between values using the Left/Right D-Pad.

    • Adjust values using Up/Down.

  2. Exit ModEdit:

    • Press Circle/B to return to the Mod Menu.

How to Use ModPlayer

  1. Choose Profile:

    • Tap Triangle/Y to choose your profile.

  2. Switch Teams/Players:

    • Use Up/Down D-Pad for teams, Left/Right D-Pad for players.

  3. Reset Temp Val:

    • Hold CROSS/A for 500ms to restore default shot meter values.

  4. Exit ModPlayer:

    • Tap Circle/B to return to Mod Menu, or double tap Circle/B to exit all menus.

Installation et configuration

Suivez ces étapes pour installer le fichier GPC téléchargé sur votre Cronus Zen.

Guide d’installation complet
  1. Téléchargez le script

    Utilisez le bouton de téléchargement de cette page et enregistrez le fichier .gpc sur votre ordinateur.

  2. Connectez votre Cronus Zen

    Ouvrez Zen Studio Live dans Chrome ou Edge.

    • Connectez votre Cronus Zen par le port PROG et sélectionnez « Connect Device ».
  3. Ouvrez le script dans l'onglet Éditeur

    Faites glisser le fichier .gpc téléchargé dans l'onglet « Éditeur ».

  4. Ajouter le script à un emplacement de périphérique

    Allez dans l'onglet Appareil, sélectionnez MES SCRIPTS en haut à droite, puis faites glisser le fichier .gpc choisi dans un emplacement vide.

  5. Programmer le Cronus Zen

    Cliquez sur le bouton Programme orange clignotant en haut pour enregistrer le script sur votre Zen.

  6. Connectez, sélectionnez votre emplacement et testez

    Une fois la programmation terminée, connectez le Zen à votre console ou PC en suivant la procédure adaptée à votre plateforme. Sélectionnez l’emplacement du script installé, puis suivez la configuration des touches et les valeurs de départ du créateur. Testez avant de modifier les réglages et ajustez une seule valeur à la fois.

Besoin d’aide pour la configuration ?

Si le Zen n’est pas détecté, vérifiez la connexion PROG et utilisez un câble USB permettant le transfert de données. Si un fichier GPC ne se compile pas, vérifiez que le téléchargement est complet et que le fichier est compatible avec votre version de Zen Studio.

Goatmode 2k25 : questions fréquentes

Comment installer Goatmode 2k25 ?

Ce téléchargement est un script GPC. Suivez les étapes numérotées ci-dessus pour l’ouvrir dans Zen Studio, l’affecter à un emplacement et programmer votre Zen.

Quel accès faut-il pour Goatmode 2k25 ?

Ce script figure dans la bibliothèque ultimate. Connectez-vous avec une offre qui inclut ce niveau ; le bouton de téléchargement indique l’accès disponible pour votre compte.

Où trouver les réglages de Goatmode 2k25 ?

Le guide du créateur figure sur cette page. Connectez-vous avec l’accès requis pour les consulter et adaptez le script à vos réglages en jeu avant toute modification.

Assistance en ligne

Image agrandie

Cliquez n’importe où ou appuyez sur Échap pour fermer

Aperçu du script