16 NOV — GÉNÉRATEUR IA ROBLOX AJOUTÉ

Demon v19.3 : script Cronus Zen pour Apex Legends

Ultimate
Apex Legends
Demon v19.3
Apex Legends
Guides
Réglages
Menu des mods
Illustration

Demon v19.3

CZA

Détails du script

Créateur
CZA
Accès
Ultimate
Format du téléchargement
.GPC
Plateformes compatibles
Multiplateforme
Version
v19.3
Fiche mise à jour

Demon v19.3 est un script Zen pour Apex Legends créé par CZA. Consultez les informations de téléchargement et de configuration ci-dessous.

Ce script Cronus Zen pour Apex Legends est développé par CZA.

Fonctionnalités

Guides

Ce script comprend un guide d’utilisation

Réglages

Ce script est livré avec des valeurs recommandées

Menu des mods

Ce script dispose d’un menu de mods personnalisable

Guides

CZA DEMON 19 SCRIPT – CONFIG INSTALLATION GUIDE

1) Install your script to your zen. Here’s a video showcasing how -

https://youtu.be/GDPmBw6SGZ8

2) Once the scripts on your zen load up Apex and open the script with LT + MENU/L2 + OPTIONS

3) Now scroll through the tabs and input the configuration (see below). Note: Settings can be changed directly with the d-pad. However, some of them need to be changed while holding LT/L2 simultaneously.

SCRIPT NAVIGATION FAQ

Open and close/save the script on your zen with LT + MENU/L2 + OPTIONS

Scroll through the tabs with left/right d-pad

To turn a setting/tab E.G “Demon assist” use LT/L2 + Up/Down on the d-pad

To change settings inside of tabs use LT/L2 + Left/Right on the d-pad

MORE INFO ON SCRIPT FEATURES

WEAPON SELECTION:

Two Touch Select System:

To use this head to the script > weapon mods > wpn select > 2 touch

 

The buttons to hold are:

  • Heavy Light Select: PS4 Touch / Xbox One Xbox
  • Other Select: PS4 Options / Xbox One Menu
  • Energy Select: PS4 Share / Xbox One View

Primary weapons can be set with a single button press, while secondary weapons require a double button press:

  • Flatline: L1
  • Spitfire: Up
  • Hemlock: Left + Heavy Light Select
  • Rampage: Right
  • Prowler: Down
  • Wingman: L3
  • Volt: L1
  • G7 Scout: Up
  • Sniper: Left + Other Select
  • Marksman: Right
  • Shotgun: Down
  • None: L3
  • Havoc: R1
  • Devotion: Triangle
  • Havoc Turbocharger: Square
  • L-Star: Circle
  • Devotion Turbocharger: Cross
  • Hemlock Rapid Fire: R3

 

To reset all primary settings (gun/barrel/sight), hold ADS and tap down once.

 To reset all secondary settings (gun/barrel/sight), hold ADS and tap down twice.

 To reset both primary and secondary settings and enable recoil smoothing for all guns and attachments, hold ADS and press Heavy Light Select.

 Attachments can also be set with a single or double button press: 

  • 2x Bruiser: Up
  • None/1x: Left + ADS
  • 3x: Right - Blue: Up
  • White: Left + Jump
  • Purple: Right
  • None: Down

 

The system is smart enough to know if a certain weapon does not allow certain barrels or sights. I know this may seem confusing but once you get the hang of it and start using it in game it makes total sense.

 

Alternatively, you can use the “OLD” weapon selection 

 

To select guns with this you need to hold LT/L2 then

  • Scroll through weapons with up/left on the d-pad
  • Scroll through sights with down on the d-pad
  • Scroll through barrels with right on the d-pad 

 

This mode is a little more simple however is less efficient in the long run so we always recommend learning “two-touch” 

Movement Mods 

 

To use this head to the script > Movement > Turn on any you’d like to use 

  • Wall Bounce: After sliding and jumping towards a wall, jumping off the wall allows you to change direction and perform a wall bounce.
  • Super Jump: At a zipline, press JUMP + L3 to perform a double jump in the air.
  • Hyper Jump: At a zipline, press L3 + Jump to perform a triple jump in the air.
  • Super Glide: When climbing up a wall after jumping, press PING at the peak of the climb to perform a super glide. If you crouch and don't move, you're too early; if you just regular jump, you're too late.
  • Bunny Hop: While moving, hold JUMP to perform a bunny hop.
  • Slide Cancel: While moving forward, press CROUCH to slide and stand back up before losing momentum.
  • Jump Slide: While moving forward, hold RELOAD and press JUMP to jump off a ledge and get the furthest possible jump.
  • Heirloom Spin: While holstered and moving forward, double-tap SPRINT to perform an heirloom spin. (Note: Survival slot needs to be turned off in-game for this to work.) When toggled on, you can use RELOAD + MELEE to use your survival slot.
  • Mantle Jump: use this feature through turning on “super jump” when you get to the top of the zipline look down, move back until you can attach to the zipline then enable to super jump feature just like we previously mentioned. E.G To perform a Super Jump, press JUMP and PING at a zipline at the same time.

 

The system is smart enough to know if a certain weapon does not allow certain barrels or sights. I know this may seem confusing but once you get the hang of it and start using it in game it makes total sense.

CONFIGURATION:

- THESE ARE OUR PRIVATE, CUSTOM-MADE SETTINGS MADE BY OUR IN-HOUSE TEAM & WON’T BE FOUND ANYWHERE ELSE

- THEY ARE LISTED IN CHRONOLOGICAL ORDER ACCORDING TO THE SCRIPT TABS

- THE SCRIPT CAN BE OPTIMISED TO ANY SENS

 

Réglages recommandés

IN GAME SETTINGS

  • SENSE: 4/3 RESPONSE
  • CURVE: CLASSIC
  • DEADZONE: SMALL
  • PER OPTICS: OFF IN THE ZEN
  • ALC: OFF
  • LOOK: 4
  • ADS: 3
  • DZ 6
  • RC 10

DEMON/HSTLR/CEORIN:

Demon

  • WHEN: PRIMARY
  • TYPE: ADSORFIRE
  • SHAPE: HELIX
  • SPEED: 35
  • RADIUS: 9
  • SPIRAL: On
  • BOOST: 0
  • MIN RADIUS: 0
  • MAX RADIUS: 0
  • TRACKING: ON

Installation et configuration

Suivez ces étapes pour installer le fichier GPC téléchargé sur votre Cronus Zen.

Guide d’installation complet
  1. Téléchargez le script

    Utilisez le bouton de téléchargement de cette page et enregistrez le fichier .gpc sur votre ordinateur.

  2. Connectez votre Cronus Zen

    Ouvrez Zen Studio Live dans Chrome ou Edge.

    • Connectez votre Cronus Zen par le port PROG et sélectionnez « Connect Device ».
  3. Ouvrez le script dans l'onglet Éditeur

    Faites glisser le fichier .gpc téléchargé dans l'onglet « Éditeur ».

  4. Ajouter le script à un emplacement de périphérique

    Allez dans l'onglet Appareil, sélectionnez MES SCRIPTS en haut à droite, puis faites glisser le fichier .gpc choisi dans un emplacement vide.

  5. Programmer le Cronus Zen

    Cliquez sur le bouton Programme orange clignotant en haut pour enregistrer le script sur votre Zen.

  6. Connectez, sélectionnez votre emplacement et testez

    Une fois la programmation terminée, connectez le Zen à votre console ou PC en suivant la procédure adaptée à votre plateforme. Sélectionnez l’emplacement du script installé, puis suivez la configuration des touches et les valeurs de départ du créateur. Testez avant de modifier les réglages et ajustez une seule valeur à la fois.

Besoin d’aide pour la configuration ?

Si le Zen n’est pas détecté, vérifiez la connexion PROG et utilisez un câble USB permettant le transfert de données. Si un fichier GPC ne se compile pas, vérifiez que le téléchargement est complet et que le fichier est compatible avec votre version de Zen Studio.

Demon v19.3 : questions fréquentes

Comment installer Demon v19.3 ?

Ce téléchargement est un script GPC. Suivez les étapes numérotées ci-dessus pour l’ouvrir dans Zen Studio, l’affecter à un emplacement et programmer votre Zen.

Quel accès faut-il pour Demon v19.3 ?

Ce script figure dans la bibliothèque ultimate. Connectez-vous avec une offre qui inclut ce niveau ; le bouton de téléchargement indique l’accès disponible pour votre compte.

Où trouver les réglages de Demon v19.3 ?

Le guide du créateur figure sur cette page. La section Valeurs recommandées contient ses valeurs de départ. Connectez-vous avec l’accès requis pour les consulter et adaptez le script à vos réglages en jeu avant toute modification.

Assistance en ligne

Image agrandie

Cliquez n’importe où ou appuyez sur Échap pour fermer

Aperçu du script