Initial Setup Instructions

• FIRST: Reset your in-game values and match the ones listed below.
• SECOND: You have two options for plug and play values that work. You do not need to adjust anything besides in-game settings.
• THIRD: There are two different types of deadzones:
  • Ingame Deadzone must remain 1 and 1.
  • Script deadzone acts as your ingame deadzone to stop stickdrift.
  • SCRIPT DEADZONE has a default of 10 but can be changed. See below.
• LASTLY: If you are using plug and play, do not TOUCH the custom sens menu. Leave everything at 0 unless you are having issues with the semis.
  • If you are having issues with the semi guns, read the Custom Sens Section.

Recommended Configuration Notes

• If you're playing the game in a different language, change it to English since the settings menu may differ.
• Use the recommended values.
• Yes, your deadzone needs to be 1 IN GAME.
• The default script deadzone is 10. It can be changed in the main menu. See the Main menu section below.
• The lower the deadzone, the smoother the aiming.
• If you have stick drift, refer to the Main Menu Section for instructions on adjusting the SCRIPT DEADZONE.

Main Menu Instructions

• Hold L2 / LT + OPTIONS to enter the main menu.
  • If the menu doesn’t open, you may have a controller or cable issue.
• While in the Menu:
  • Tap TRIANGLE / Y to switch weapon profiles / Jackhammer and Deadzone.
  • Tap LEFT or RIGHT to navigate the attachments for that weapon.
  • Tap UP or DOWN to toggle ON/OFF the attachment anti recoil for that weapon.
  • Tap Cross / A to access the Weapon Profile Menu (see section below).
  • Tap Square / X to access the custom sens menu for the gun listed on the top line.
    • Do not use this if you are using plug and play.

Weapon Profile Behavior

• Pressing Y changes the top line (guns / Jackhammer / Deadzone).
• Each gun has a middle line listing the 3 attachments: Holo, Ironsight, and 4x.
• Each attachment has its own ON/OFF toggle on the bottom line for the current gun.
• To use AK with 4X:
  • Make sure the top line says AK.
  • Hit LEFT or RIGHT on the Dpad until you see 4X.
  • Hit UP on the Dpad to turn it on.
  • Hit LEFT on the Dpad and turn HOLO and Iron Sight off.
• Common mistake: Using AK with HOLO or Ironsight while 4X is still turned on (causes gun to shoot down).
• Refer to the Weapon Profile Menu section to:
  • Set up 3 profiles for quick toggling (without entering the menu).
  • Use the built-in safety that only allows one attachment at a time.
    • This is the recommended method for changing guns.

Using Weapons Not Assigned to Quick Toggle

• Access the menu.
• Press Y to navigate to the weapon.
• Use LEFT / RIGHT on Dpad to choose the attachment.
• Use UP on Dpad to turn the attachment’s Anti Recoil ON.
• Tap PS / XBOX button to save and exit OLED menu.
• If successful, the gun name will appear at the bottom of the OLED.

Script Deadzone Adjustment Instructions

• The default deadzone for the script is 10.
• If you want to change the script deadzone due to stick drift:
  1. Hold L2 / LT + OPTIONS to enter the main menu.
  2. Tap TRIANGLE / Y until you see deadzone.
  3. Tap UP to turn it ON (this disables the default value of 10).
  4. Tap X to open the edit value menu.
  5. Hold Cross / A and press UP or DOWN to change value by 10.
  6. Hold Cross / A and press LEFT or RIGHT to change value by 1.
  7. When done, press the PS or XBOX button to save.